|
The following is a list of the benefits and features of the K Factor Filter: Feature | Benefit | | Self–cleaning | No maintenance | | Fully automatic | Cost saving | | Continuous operation | No downtime | | Bubble tight seal | No by pass of solids | | No backwash | No liquid loss | | Simple design | No attendant required | | Media | Removes trace oils | | Flow from 5GPM & up | Meets all needs | | Unique design | Solids to 5 microns | | Auto level probe | Self-cleaning | | Advances as required | Low cost to run | | Proven product | No risk | | Internal by-pass | Protection | | Barrier filter design | All the solids | | Baffles | Evens out flow | - Extends tank life
- Saves on water
- Energy saver
- Nozzle protection
- Saves on waste removal
- Shearing action click here
The Shearing Nozzle [Key Feature]
The liquid to be filtered flows into the header box and then is evenly distributed across the filter media via “The Shearing Nozzle”. The filter media is on a steep slope to create the shear. The flow of liquid from the nozzle impacts on the media creating “The Shearing Action”. The unwanted solids are pushed to the bottom of the sealed basin and the clean filtered liquid flows through the selected filter media. This unique feature reduces the footprint, reduces the amount of media used and improves the filtration.
 The shearing nozzle is situated close to the filter media to create a shearing action on impact. The flow enters the header box and impacts on the media to push the solids to the bottom of the sealed basin to: - increase filtration
- reduce the amount of filter media used
- smaller footprint
- smaller particle removal
Note: The K Factor Filter “Removes all the solids” regardless of: - Size
- Shape
- Specific gravity
- Concentration of dirt
- Type
|
